Cassava starch production in Ghana making process analysis

The entire cassava starch production in Ghana can be divided into the following section:
Pretreatment of raw material-extraction of cassava starch-separating and desanding of cassava starch-concentration and refining of cassava starch-cassava starch dewatering-cassava starch drying and packing
Cassava starch production process

Here is the detail introduction of cassava starch production in Ghana
1. Dyr sieve for cassava cleaning: Dry sieve is the widely used cassava starch processing machine for cleaning process in cassava starch production in Ghana. It has the features of dry sieve is simple structure, reasonable speed and no damage to material.

2. Paddle washing machine: Incassava starch production in Ghana, washing serves to remove the outer skin of the root as well as the adhering dirt. It features with large capacity, low water consumption and good washing effect.

3. Grating: This is the most important process for cassava starch production in Ghana for it determines the starch yield. Rasper is a high efficient cassava grating machine with a cassava breaking rate more than 94%. Doing Company rasper is designed and manufactured on the basis of international advanced technology.
Cassava grater


4.Centrifugal filtering: Another main factor which influence the extraction rate in cassava starch production in Ghana is the filtering process. The centrifuge sieve and fine fiber sieve are adopted for this process. And the high efficiency of these machine makes it feasible to utilize high quality sieve plates made of stainless steel, which will withstand abrasion and CIP-chemicals.

5.Desanding: The specific gravity of mud and sand is greater than that of water, and is also larger than that of starch granules. Hence the separation of sand out of starch slurry by gravity separation is effective. Desander is a machine serves for this purpose in cassava starch production in Ghana.

6. Concentration and refining of cassava starch
Hydrocyclone station is the widely used machine in cassava starch production in Ghana  for starch refining, washing and recycling. This cassava starch processing machine can effectively separate non-starch substances such as protein, fiber and cell sap in starch.


7.Dehydrating: Due to the starch milk contains a lot of water, it must be dehydrated for cassava starch production in Ghana . At present, peeler centrifuge is often used for dewatering. The moisture content of wet starch is required to be 38% lower after dehydration.

8. Cassava drying section
In cassava starch production in Ghana , cassava starch drying is done by flash dryer. The water in wet cassava flour evaporate by high speed hot air flow to desired quality.
Cassava dryer machine

The project details of cassava starch production in Ghana :
1.Plant: this project covers an area of about 400 square, the plant generally is not small than 1,000-square 
2.Power: 380 volts, 3 phases, 50 Hertz, the largest floating voltage 6% and 4% of the maximum frequency of floating.
3.The installed capacity is about 180KW. The actual consumption is about 150KW
4.Water: The extraction Section 15-20 cubic / hour, in line with the drinking water standard. Section 10 cubic cleansing / hour, it can be part of the cycle and also be used for later water. (User-owned boiler)the burning stove can also be used in plant.



Chat on line / Whatsapp/Phone:+86 135 2661 5783
Contact: Ms Elina
Email: market@doingmachinery.com
Tel: 0086 371 5677 1822
View more:
cost of cassava processing equipment
cost of cassava processing plant in Nigeria
cassava starch production in Nigeria
cassava starch production line



Comments

Popular posts from this blog

What factors affect the price of cassava starch processing plant ?

How to refine starch from cassava root?

Doing Company shipped 5T/H cassava starch production line to Nigeria